[Translate to English:]

    Cable Management, Cable Entry and Shielding

    With the KDS systems for cable entry and the KES system for cable entry, CONTA-CLIP enables tool-free, IP66 or IP54 sealed passage or insertion of assembled and non-assembled cables and hoses.

    Our KDS solutions for cable entry enable the quick, needs-based dimensioning of passage openings for assembled cables without the use of tools becoming necessary. They offer a tightness according to protection class IP66. All CONTA-CLIP solutions for cable entry are designed in such a way that the diameter and number of frame openings can be adjusted without dismantling the frame. Due to these conceptual advantages, which the CONTA-CLIP cable entry solutions bring with them, control cabinets or machine housings can be prepared uniformly for different purposes.

    The KES solutions for cable entry ensure quick, tool-free insertion of unassembled cables or pneumatic hoses into control cabinets or housings. The KES entry plates have a dimensionally stable polyamide frame overmoulded with elastomer. To insert the desired number and diameter of cables into the cable entry solutions, the surface membrane is pierced with a screwdriver, then the unassembled cables can simply be pushed through into the cable entry solutions developed by CONTA-CLIP. Tapered entry grommets on the back of the panel ensure that the cable entry systems are sealed to IP66 and provide reliable strain relief. With up to 32 lines per board, the cable entry solutions achieve a significantly higher packing density than conventional entry systems.

    The SAB/SSAB/SABK range of shield connection brackets is used for reliable shield contacting with conductor diameters from 3 mm to 35 mm. The different shielding systems SAB/SSAB from CONTA-CLIP are one of the largest portfolios on the market and offer the right solution for every application.

     

    Inverted cable entries KDSI-SR

    The revolution in the field of cable entry! Fast. Safe. Easy as pie - from the outside to the wall! The KDSI-SR cable entry system offers maximum flexibility and time savings in terms of cable management on control cabinets, enclosures and machines, as well as secure sealing and strain relief for assembled and non-assembled cables - with and without connectors.

    KDSI-SR Product information

    Video animation Assembly video

    KDS-R Round cable entries

    For metric break-outs from M20 to M63, CONTA-CLIP has added round cable entries for cables with or without attached plugs to its portfolio. In case of maintenance or retrofitting with assembled cable harnesses, cables with diameters from 2 to 35 mm can be quickly and safely inserted into the switchgear cabinets or housings. Sealed according to IP66. The modular system ensures quick and easy assembly in three steps. A reliable seal and absolute secure fit is also provided by the slitted, tapered seals with a wave-cut profile, which, after the cables are routed through the cable entry, are placed around the cables and then pressed into the round cable entry. After that, the separable thread and locking adapter is easily screwed together with the round frame outside the switchgear cabinet. The separable locknuts that are mounted on the inside of the locking elements ensure safe and secure attachment.

    KDS-RVideo animation

    Assembly video

    KDS-FP flange plate

    The new KDS-FP flange plate provides manufacturers of machines with a very cost-effective, convenient feed-through solution. It can be used to adapt housings and switchgear cabinets to fit your updated requirements at any time, and can also considerably simplify your warehousing. You no longer have to stock switchgear cabinets or distributors with different configurations of assembled cable and cable outlets. Instead, you can uniformly prepare your products with the flange plate and then adapt them at any time to your specific cabling or tubing requirements.

    KDS-FP Video animation

    Assembly video

    Kabeldurchführung mit Flanschplatte

    KDS-SR Screw frame

    Revolutionary cable entry systems

    Fast. Safe. Turning cables inside out! The KDSClick cable entry system is a cable management solution for switchgear cabinets, housings and machines that features secure seals and strain relief for pre-assembled and non-assembled cables – with or without connectors. KDSClick saves you time and provides you with maximum versatility. 

    KDS-SR Video animation 

    Assembly video

    Kabeldurchführung

    KDS-FB Cable entry system for flat cables

    The KDS-FB cable entry system for flat cables provides you with outstanding versatility and saves you time while managing cables, especially for industrial trucks, crane systems and elevator applications. The "fish skin" on the seals mechanically surround the inserted flat cable; they ensure optimum tolerance compensation and IP66 protection.

    KDS-FBVideo animation

    Assembly video

    Kabeldurchführung für Flachleitungen

    KES cable entries

    When feeding in non-assembled cables, lines and pneumatic hoses (without connected plugs), CONTA-CLIP has a wide range of products that offer alternatives to cable glands or single-membrane feed-throughs.

    KESVideo animation

    Assembly video

    Kabeleinführung

    KES-E cable entries

    Many lines in a confined space.
    With the cable entrie system KES-E many cables (without connector plugs) with different diameters from 1 to 16.1 mm can be inserted toolless on a confined space.

    KES-E Assembly video

    KES-E-R cable entries

    Lots of cables in a small space.
    With the addition of the round M50 bushings KES-E-R in the KES-E cable entry system, many cables (without plugs) with different diameters can be inserted in a very small space. The cable entry is inserted into the opening without tools (wall thicknesses A from 1.5 mm - 2.5 mm or B from 2.5 - 4 mm). To insert the cables, the corresponding membrane (centering point is marked) is pierced and the cables are simply installed through. The material TPE ensures IP54 protection degree.

    KES-E-R Assembly video

    KDS-KV Separable cable glands

    For metric break-outs from M20 to M63, CONTA-CLIP provides separable cable glands for cables with or without attached plugs. In case of maintenance or retrofitting with assembled cable harnesses, cables with diameters from 2 to 35 mm can be quickly and safely inserted into the switchgear cabinets or housings and sealed according to IP66. This separable system ensures quick and simple installation. The slitted seal has a wave-cut profile that ensures a reliable seal and a totally secure attachment. The seal is first  placed around the cable and then inserted in one of the two halves of the cable gland. After inserting the seals, the two halves of the cable gland are simply snapped together. A  locknut (which can also be separated) on the inside of the cabinet  

    KDS-KV Assembly video

    Geteilte Kabelverschraubung

    Combination sealing element for cable entry systems KDS

    Sealing elements with dynamic and static strain relief

     

    The 2-component combination sealing elements consisting of an elastic seal and robust strain relief enable flexible cable entry for prefabricated and non-prefabricated cables with protection class IP66. The two-part sealing element, whose half-shells can be easily opened and closed with a snap lock, guarantees the installation-friendly and precisely fitting sheathing of the cables. For installation, the combination sealing elements are pressed into the openings of the previously attached inlays of the KDS cable entry systems from the inside out.

    The special design of the sealing elements enables compliance with the specified tensile forces for retention capacity and strain relief for non-armored cables and wires in version A of the DIN EN 62444:2014-05 standard (cable glands for electrical installations) 

    Due to their enlarged sealing range, they currently cover cable diameters from 1 mm to 9 mm and therefore simplify storage requirements.

    Online catalog Factsheet

    Shield-connection clip

    In the field of industrial process engineering, a high degree of interference immunity is required of electrical equipment. This is a critical factor affecting the availability of industrial measurement and control systems.

    When constructing low-interference systems, both the cable shielding and the shielded ground are very important. The juncture where the cable shielding connects to the housing ground is a critical point. The connection should be low-ohm and should also feature minimal inductive resistance.

    You should be certain that this connection can be established in a practical, simple and quick manner. CONTA-CLIP's SAB/SSAB shielding systems are one of the most comprehensive product portfolios on the market. They offer a perfect solution for any application.

    Shield-connection clip Assembly video

    Schirmanschlussbügel

    Get an overview...

    Discover the numerous product innovations out of the area Cable management comfortable and clear at a glance in our catalog 08!

    Product catalog (PDF)